Fix-A-Leak Products

Fix-A-Leak

Overview

· FixA-Leak is a blended concentrated material designed to seal leaks in virtually any material
· Can be applied for leaks in the shell and works equally well in plumbing
· Will seal holes 1/8" in diameter
· Will form a permanent seal

Use 8 oz. per 1,000 gallons for minor leaks. A second bottle can be added for larger leaks.


Directions

*Shake Well Before Using*

1.  Bypass Filter before adding FIX-A-LEAK to water.

2.  With pump running add FIX-A-LEAK slowly through skimmer or in front of any other suction intake.

3.  FIX-A-LEAK is very heavy and will sink to the lowest point rather quickly.  It must be stirred back into suspension every 4-6 hrs. during circulation of water.

4.  Continue to recirculate water until the leak has stopped.

5.  After the leak has stopped, give it the proper time to cure (24-48 hrs.).  You may then return to normal filtration.

6.  Treatment can be repeated if necessary.

*NOTE*  Never allow cartridges or DE elements to dry before they are
                cleaned.  Rinse clean with water.

It is advisable, if your spa is a foam insulated type and has been leaking for a long period of time:

Once you determine the leak has stopped, drain your tub.  Properly wipe down the spa with a wet cloth, nothing abrasive.  Allow to dry for 4-5 days to all FIX A LEAK to properly cure.
 Fix-A-Leak